MEIKEE sells outdoor lighting in several styles. Of the three security lights compared below, its 100W Motion Sensor Flood Light puts out the most light. Three adjustable heads, a remote and a long menu of timing options all sit on one hardwired fixture.
I haven’t handled this light myself. This page works from the spec sheet and the brand’s own descriptions, and I say so whenever a claim comes from the maker.
The short verdict: it suits anyone who wants a security light they can tune to a real driveway, and it’s a poor fit if you can’t get to household wiring. You can browse MEIKEE’s range and check the current price on MEIKEE’s storefront on Amazon.
What the Spec Sheet Says
These are the headline figures, as the brand lists them.
- Light output: 9,600 lumens from 164 LEDs, in 6500K daylight white
- Heads: three, each adjustable on its own, for a lighting spread of up to 270 degrees
- Weather rating: IP66 on the housing and IP65 on the sensor head
- Detection range: selectable at 6, 9 or 12 meters, with about 300 square meters of coverage on the longest setting
- Sensing angle: 180 degrees
- Brightness: 10 to 100 percent, set from the remote
- Hold time: adjustable between 45 seconds and 10 minutes once motion is picked up
- Modes: round-the-clock detection, detection after dark only, constant light and a timer
- Control: a 15-key remote in the box, plus a 5-second test button
Two details deserve a second look. The sensor head carries the lower IP65 rating while the housing is IP66, so check which rating applies to the exact model you choose.
The other detail is that sensing and lighting are decoupled. The sensor covers 180 degrees on its own, and each head can be aimed somewhere else entirely.
That split means the sensor can face the approach while the heads light the area you care about.
Sensor Settings and Modes
Most of the adjustment on this light sits in the sensor settings.
Detection comes in three steps. The right one depends on how far your driveway or yard runs from the mount, not on how much range you’d like in theory.
Range should follow the distance you actually need to cover. With the sensor on its 12-meter step above a short driveway, it also watches the street, so passing traffic can switch the light on. Start with a shorter step and move up only if the light reacts too late.
The light offers four modes: detection around the clock, detection at night only, constant light, and a timer. The remote also sets sensitivity and how long the light holds after movement.
Hold time is the other setting to match to the space. It runs from 45 seconds to 10 minutes, so a short hold fits a path you only pass through, while the long end gives you time to carry things in from a parked car.
Installing a Hardwired Light
This fixture runs on household wiring. There is no battery and no solar panel, so you need an existing junction box or outdoor light to connect it to. If you don’t have one, the decision is already made.
With three heads, you aim three times. The built-in 5-second test button lets you check each head’s position while you’re still at the mount, before anything is locked down.
With four modes available, cycle through each one once the light is wired in, then leave it on the one that suits the spot.
Brightness, range and timing are all set from the remote, so keep it somewhere safe. The 70W model adds physical buttons alongside its remote, which gives it a fallback if the remote goes missing.
Where It Sits in the Range
The brand’s flood and security lights span roughly 30W to 150W. Three of them are compared here.
| Model | Output | What stands out |
| 42W | 3,600 lumens | Three heads, 56 LED chips, 40-foot detection range, timer from 5 seconds to 10 minutes |
| 70W | 6,580 lumens | Three heads, 6, 9 and 12-meter steps, four modes, remote plus physical buttons |
| 100W | 9,600 lumens | Three heads, 6, 9 and 12-meter steps, 15-key remote, 5-second test button |
The 42W suits a single door or side yard, and it is the lowest-output of the three. The 70W sits in the middle, with button control as a backup to the remote. The 100W gives the most light and the fullest remote of the three.
If 9,600 lumens is more light than your space needs, the 70W is the logical step down. The 150W RGBW models are a different thing, built for decorative wall washing rather than security.
MEIKEE vs LEPOWER
LEPOWER makes motion-sensor flood lights with adjustable heads too. Setting the spec sheets side by side shows where each one leans.
On output, MEIKEE’s 100W reaches 9,600 lumens. LEPOWER’s standard flood lights top out near 4,800 lumens, with models at 3,000, 4,200 and 4,800 along the way.
On control, MEIKEE leans on a remote for range, timing and brightness. LEPOWER’s 38W light reaches up to 72 feet, about 22 meters, at the same 180-degree detection angle, but only some of its models ship with a full remote, and the rest rely on switches.
On weather rating, MEIKEE puts its housings at IP66, with the sensor head at IP65 on some models. LEPOWER typically lists IP65 for both the sensor and the housing.
If you want the most output and remote control, MEIKEE is the stronger fit. If you would rather use switches and don’t need a remote, LEPOWER’s 38W and 42W models are a fair alternative, and the 42W adds anti-glare optics.
Warranty, Returns and Safety Record
MEIKEE’s listings commonly mention a two-year replacement warranty. It is aimed at defects in materials and workmanship, and the exact terms can vary from one listing to the next, so confirm them for the model you choose.
Separately from the warranty, listings usually show a return and refund window: roughly three months for standard products and about one month for some solar items.
Coverage of this kind is written for factory faults, not for what happens afterward. Wiring errors and knocks, a mower strike for example, usually fall outside it.
The brand does have one documented safety episode. A 2020 European safety alert named a single MEIKEE 50W floodlight from one production batch, citing an earthing defect, and the importer destroyed that batch instead of selling it.
That case involved one model and one batch, not the current range. It does show why hardwired lights are best bought from a seller you can trace, such as through the MEIKEE storefront on Amazon.
FAQ
Is the 100W light hardwired or battery powered?
Hardwired. Plan on a junction box or an existing outdoor fixture to connect it to. MEIKEE’s battery and solar options are separate products: the solar spotlights and the wall sconces.
Can it handle rain?
The housing is rated IP66, which covers dust and strong jets of water such as a hose, and the sensor head is rated IP65, a notch below. Neither rating is meant for submersion.
How far does the sensor reach?
Range is selectable at 6, 9 or 12 meters, with a 180-degree sensing angle. The brand cites roughly 300 square meters of coverage at the longest step.
Why might the light not react to motion?
Check the mode first. In the after-dark detection mode the light stays off in daylight by design, and the constant-light mode doesn’t depend on motion at all. Sensitivity and range, both set from the remote, are worth reviewing too.
What does the warranty cover?
MEIKEE’s listings commonly mention a two-year replacement warranty for defects, with a separate return window that depends on the product. The listing you buy from has the exact terms.
The Verdict
On paper, the 100W Motion Sensor Flood Light is a well-equipped security light. Three independently aimed heads, 9,600 lumens, adjustable range and hold time, and a remote make it a very adjustable fixture.
Pick it if you have wiring access and a driveway, yard or garage that benefits from a wide, bright spread. Pick the 70W or 42W if you need less light, or MEIKEE’s solar line if you can’t run wire at all.
Skip this category if hardwiring isn’t possible, and whichever model you choose, cycle through its modes once it is installed.
When you’re ready, check the current price and options on MEIKEE’s storefront on Amazon.
